Voltage Monitoring Using ESP32, Voltage Sensor & Arduino IoT Cloud | Real-Time Voltage Tracker | Tech Trends Shameer | YouTubeToText
YouTube Transcript: Voltage Monitoring Using ESP32, Voltage Sensor & Arduino IoT Cloud | Real-Time Voltage Tracker
Skip watching entire videos - get the full transcript, search for keywords, and copy with one click.
Share:
Video Transcript
[Music]
the components required for this
experiment are es 32 board MPT voltage
sensor LCD display i2c converter
breadboard two pin connecting wires and
connecting cable [Music]
[Music]
it then from the left side menu go to
button here we can rename the thing as voltage
monitoring and click on the rename
button now we need to add one variable
click this add button and add the
and select the variable type as floating
button now we need to select the device
now go to Associated device and click
the select device
button here set up new
device and select the third party device
here we are using esp32 board so select
esp32 and and select the model as esp32 D
module and click on continue button here
next here copy this secret
key select this check box and click the
continue button and click
done now we need to configure the
network click the configure button under Network
Network
here enter the Wi-Fi username and
password and then paste the secret key
save now go back to the
dashboards here also click the plus dashboard
button here also we can rename the
and click on the rename
button here click this edit button and
add a
gauge now click add and select the
gauge and here we can give the gauge
name as
voltage and we need to link with the
variable which we created in the things
menu so click this link variable
variable now here we can give the
maximum max value is 500 and click on
the done
monitoring and now go to
sketch now the basic template is
generated and we need to addite the
logic so I have already wrote the
program so I will just copy paste the
program and I will share the program
description now we need to upload the
program for that connect the esp32 board
to your
laptop now this upload button is enabled
now click this button and upload the
program now the program is successfully
uploaded to the esp32 board we can also
check the output through the mobile for
that download the iot remote application
from the Play Store once you open the
application you can see the uh dashboard
which we created in
thein iot Cloud website now click on the
Click on any text or timestamp to jump to that moment in the video
Share:
Most transcripts ready in under 5 seconds
One-Click Copy125+ LanguagesSearch ContentJump to Timestamps
Paste YouTube URL
Enter any YouTube video link to get the full transcript
Transcript Extraction Form
Most transcripts ready in under 5 seconds
Get Our Chrome Extension
Get transcripts instantly without leaving YouTube. Install our Chrome extension for one-click access to any video's transcript directly on the watch page.
