HOW TO INSTALL VINYL FLOORING SIMPLE STEPS TO FOLLOW | TheRykerDane | YouTubeToText
YouTube Transcript: HOW TO INSTALL VINYL FLOORING SIMPLE STEPS TO FOLLOW
Skip watching entire videos - get the full transcript, search for keywords, and copy with one click.
Share:
Video Transcript
Available languages:
View:
hey guys it's the record date I've got
another do-it-yourself project I'm gonna
show you how easy it is to install vinyl
flooring so I'm gonna lay vinyl flooring
in this laundry room and as you can see
they've got a few spots that need to be
fixed there's a couple of trouble spots
some water damage these spots need to be
fixed and repaired before it put down
the vinyl flooring so the first thing
you want to do is identify the spots to
repair so we can fix the subfloor before
you lay the underlayment then you want
to remove and cut away any loose
flooring so that the subfloor is nice
and solid then we'll start patching the
holes with this imploringly mud to make
sure that they are reinforced and nice
and solid
then those holes you can patch with the
plywood then you can start installing a
quarter inch underlayment to give the
surface a nice smooth surface before you
lay the vinyl down then you want to make
sure that you staple down the
underlayment staples about six inches
apart and then a lot closer on the seams
of unemployment make sure you use lots
of staples around any trouble spots and
then when you do the scenes you want to
make sure that your staples are one to
two inches apart this will ensure that
those seams will never curl up or come
so we're almost ready to install the
vinyl so just clean and sweep up all
debris and then you're ready to lay down
your vinyl flooring
you're gonna rough cut the vinyl about
two to three inches extra on the walls
that way if when you move down the floor
that moves a little bit you have extra
on the sides and it won't be short so
all you do is fold over one half and
I'll get ready to glue down the one half
you want to spread the glue out with
your trowel and make sure that the
trowel is ours at an angle so that it
gives you a nice thin layer and you
don't have any excess anywhere so
definitely make sure that you don't have
this much glue on the floor you want to
make sure they have a nice thin layer
okay the floor is ready to lay the vinyl
down and make sure when you roll your
vinyl out you don't get any wrinkles in
it as you roll it out pull it out nice
and easy that way it all goes down and
there's not going to be any big bubbles
for a small area like this you can just
use your hands that push out the bubbles
if you have a big area make sure you use
a roller when you're ready for the other
half just roll it back and expose it one
to two inches this is the amount of glue
that you need the spread at one time if
you use too much it gets kind of messy [Music]
[Music]
and all you're gonna do is just go back
and forth back and forth getting the
excess on the trowel as you go this side
can be laid down you know you're gonna
do is push out the bubbles just let the
cameras showing here you want to push
away from the center towards the walls
you don't have any bubbles in the middle
of the floor then you just want to
finish trimming out the edges that extra
two or three inches that you had on the
walls finish trimming that out nice and
close now all you have to do is cut and
install your base trim for this project
I hope this video helped you out with
your own do-it-yourself project thanks
for watching and I'll see you later [Music]
Click on any text or timestamp to jump to that moment in the video
Share:
Most transcripts ready in under 5 seconds
One-Click Copy125+ LanguagesSearch ContentJump to Timestamps
Paste YouTube URL
Enter any YouTube video link to get the full transcript
Transcript Extraction Form
Most transcripts ready in under 5 seconds
Get Our Chrome Extension
Get transcripts instantly without leaving YouTube. Install our Chrome extension for one-click access to any video's transcript directly on the watch page.
